


Most washes take 45 minutes and still leave swirl marks. The 2-Step Touchless Kit can do it in 5 — no contact, no scratching, no second-guessing.
This is the complete system. Absolute Acid knocks out brake dust, rust stains, and hard water deposits on contact. Savage Soap follows with deep-cleaning foam that strips road grime and grease from every panel. Two steps, two color-coded foam cannons, one rinse. Done.
No scrubbing. No swirls. Professional results — at home.
What's Included:
- Step 1 — Absolute Acid: Acid-based cleaner. Dissolves brake dust, iron fallout, rust, and mineral deposits on contact.
- Step 2 — Savage Soap: Heavy-duty foaming soap. Strips grease and road film without harming wax or ceramic coatings.
- 2 Big Boar Foam Cannons: Highest quality and durability you'll find. One per step, so you never cross-contaminate. Built for consistent thick foam coverage across every panel.
Works on: Cars, trucks, SUVs, RVs, motorcycles, watercraft, fleet vehicles and more. Trusted by professional detailers nationwide. Made in the USA.
Choose options



Watch it work
This will seriously change how you wash your vehicle!
Still unsure?
Frequently Asked Questions
- Rinse the vehicle — knock off loose dirt and debris with a pressure washer pass.
- Apply Absolute (Step 1) — load it into the labeled foam cannon and coat the entire vehicle. Let it dwell 30-60 seconds (don't let it dry). You'll see it react with brake dust and iron fallout — that's it working.
- Apply Savage Soap (Step 2) — without rinsing, switch to the second cannon and apply a thick foam layer of Savage over the Absolute. Let it dwell another 30–60 seconds.
- Rinse everything off — one thorough rinse clears both products and lifts all contamination with it. No scrubbing, no second pass needed for most vehicles.
Traditional soap only removes surface dirt. It does nothing for brake dust, iron fallout, hard water deposits, or bonded road grime — the stuff that makes vehicles look dull and hazy even after washing. Absolute Acid chemically dissolves those contaminants before Savage Soap foam-lifts everything else. The result is a deeper clean than soap alone can achieve, with zero scrubbing.
They work best together — Absolute Acid handles mineral and iron contamination that soap can't cut, while Savage Soap removes organic road grime that acid doesn't target. Using both is what makes the wash truly touchless. In a pinch, Savage Soap alone works as a standalone vehicle soap, but you won't get the full decontamination result.
Yes. The 2-Step system works well on fiberglass hulls, marine aluminum (painted), and watercraft. As with any vehicle: avoid polished/raw aluminum and do not let Absolute Acid dry on the surface.
The Starter Kit (32oz each + 1 cannon) is ideal for trying the system. The Pro 6-Pack (3×32oz each + 2 cannons) is built for households with multiple vehicles or anyone who washes frequently. The Gallon Kit (1 gal each + 2 Big Boar cannons) is the best value per wash and what most repeat customers move to after the first order.
Dilution rate varies by how big, dirty the vehicle is, and foam cannon settings, but most users get 8-10 washes per gallon of Savage Soap and 6-8 washes per gallon of Absolute Acid. Fleet operators and high-frequency washers typically go with the gallon kit for the best cost-per-wash.
Avoid applying to hot surfaces or in direct sun. Heat causes the product to dry before it can dwell and rinse properly, which can leave residue. Wash in shade or during cooler parts of the day for best results.
No. Apply Absolute Acid, let it dwell 15–30 seconds, then apply Savage Soap directly over it. One final rinse at the end clears both. That's the whole point of the two-step system.
Any gas or electric pressure washer with a 1/4" quick-connect fitting works with the foam cannons. Most home units (1,500–3,000 PSI) are perfectly fine. If you're using a garden hose, you'll need a hose-end foam cannon instead — the included cannons are pressure washer compatible.
No. Absolute Acid is acid-based and will damage polished or raw aluminum surfaces. If your vehicle has polished aluminum wheels, running boards, or trim, use Rampage Polish-Safe instead. Painted aluminum is fine.
Real Customers, Real Reviews.
